产品展示
20/20型火焰探测器

20/20L (& LB) 红紫复合火焰探测器

20/20L (& LB) 红紫复合火焰探测器


产 地:美国
品 牌:Spectrex


产品简介:
The SharpEye UV/IR Optical Flame Detectors 20/20L and 20/20LB (which includes a BIT function) are an improved version of the well-proven Spectrex Ultra Violet/Infra Red (UV/IR) optical flame detectors featuring modern microprocessors and detection algorithms that provide excellent detection sensitivity combined with enhanced immunity to false alarms.
These enhanced models were developed in light of our highly successful experience in high-speed flame detection technology for both military and commercial industrial applications.
Both models are designed to detect hydrocarbon-based fuel fires, hydroxy and hydrogen fires as well as metal and inorganic fires.
The UV/IR flame detector senses energy in the short wave section of both the ultraviolet and infrared portions of the electromagnetic spectrum.
The sensor band pass has been carefully selected to ensure the greatest degree of spectral matching to the radiant energy emissions of fire, and the lowest degree of matching to non-fire stimuli.
The UV sensor incorporates a special logic circuit that helps prevent false alarms caused by solar radiation.
The IR sensor is sensitive to radiation over the range of 2.5 to 3.0 microns. The signals from both sensors are analyzed for frequency, intensity and duration. Simultaneous matching of radiant energy in both the UV and IR sensors triggers an alarm signal.

主要特点:
紫外/红外双传感器
高速响应
20毫秒响应传输信号
用户可编程功能
误报警免疫能力(抵抗阳光干扰)
自动和手动内置测试(BIT)-LB型
标准的四线制连接
4-20mA电流(3-4线制)配置
平均无故障时间最低可达100000小时
3年质保
FM,CSA,ATEX,Gost R和Gost K认证

应用:
航空航天工业-羟基燃料,氢和肼燃料
飞机库-起落架、机翼的保护
汽车-制造和喷漆房
化工行业-生产,存储,运输
炸药和弹药-处理和存储
油漆-生产设备
石化-生产,存储,运输设施
制药业
聚合物和胶水
-制造和固化
发电设施-泵区,发电机房,无人值守站,燃气和燃煤反应堆
印刷业-溶剂处理,印刷,干燥过程
仓库-易燃材料存储设施

技术参数:
一般规格:
光谱响应
紫外波段:0.185-0.260微米
红外波段:2.5-3微米
检测范围(最高灵敏度设置,1平方英尺(0.1平方米)火焰)
汽油           50英尺(15米)    甲醇                  25英尺(7.5米)
庚烷           50英尺(15米)    甲烷*                 16.5英尺(5米)
柴油燃料       37英尺(11米)    液化石油气(丙烷)*   16.5英尺(5米)
航空煤油JP5    37英尺(11米)    氢气*                 16.5英尺(5米)
煤油           37英尺(11米)    硅烷***               16.5英尺(5米)
酒精(乙醇)   25英尺(7.5米)   聚丙烯颗粒**          16.5英尺(5米)
IPA(异丙醇)  25英尺(7.5米)   办公用纸               12英尺(4米)
* 20英寸(0.5米)火焰,** 8英寸(0.2米)的直径,*** 12英寸(0.3米)火焰
响应时间
典型5秒
可调整延时时间
最高30秒(最高20秒,遵循FM的要求)
视角
90°水平,90°垂直
内置测试
手动和自动BIT(只有20/20UB)
温度范围:
工作:-40℉(-40℃)至160℉(70℃)
可选:-40℉(-40℃)至185℉(85℃)
储藏:-65℉(-55℃)至185℉(85℃)
湿度:
最高95%

电气规格:
供电
操作电压:18-32VDC
功耗
最大.在待机时100mA
最大.在报警时150mA
电气连接
2×3/4"-14NPT管螺纹或2×M25×1.5mm ISO
电气输入保护
根据 MIL-STD-1275B
电磁兼容性
EMI/ RFI保护,CE标志

输出:
继电器
报警 - 2A@30VDC,0.5A@250VAC
故障和备用 - 5A@30VDC和250VAC
故障继电器常闭,其它常开
4-20mA
电流配置
故障:      0+0.5mA
BIT故障:   2mA±10%
正常:      4mA±5%
红外检测:  8mA±5%
紫外检测:  12mA±5%
预报警:    16mA±5%
报警:      20mA±5%
回路阻抗:  100-600欧姆

机械规格:
尺寸
4.7"x5.2"x5.2" (120x132x132 mm)
重量
铝合金: 8.1磅(3.7Kg)
316L不锈钢 14.3磅(6.5Kg)

铝合金,重型不含铜(小于1%),红色环氧树脂
可选-电抛光的316L不锈钢
环境标准
在湿度,盐和雾,振动,机械冲击,高温,低温环境中符合MIL-STD-810C
防水防尘
IP66和IP67 符合En60529
NEMA 250 6P

危险区域认证:
ATEX
EX II 2 G,EExd IIB + H2 T5(70℃),T4(85℃)
EX II 2 G,EExde IIB + H2 T5(70℃)
FM/CSA
Class I Div. 1, Groups B, C & D
Class II Div. 1, Groups E, F & G
GOST R
1ExdIIBT5/H2

配件:
火焰模拟器
20/20-311
安装支架
20/20-003(316L不锈钢)
上一页20/20SH 氢气火焰探测器下一页20/20U (& UB)紫外火焰探测器
版权所有:嘉兴市立特电子科技有限公司 浙ICP备09062594号
地址:浙江省嘉兴市城东路1137号 总机:0573-83911600-806 传真:0573-82079055 手机:13957368831 (张经理)

在线交谈
在线交谈
在线交谈
在线交谈
在线交谈
在线交谈